Pompa Celup Pedrollo Vortex TOP VORTEX (AUTO)
Range Of Performance
Flow rate up to 180 l/min (10.8 m3/h)
Head up to 7 m
Limits Of Use
Depth up to 3 m
Liquid temperature up to+40°C
(90°C for a maximum period of 3 minutes)
Passage of solid bodies up to ø 20 mm
Drainage level 25 mm from the bottom
Installation and Use
The top-vortex pump is suitable for draining dirty water that is chemically non aggeressive. The construction guarantees simple and safe operational due to the complete cooling of the motor by the pumped water and the double seal design.
It is recommended for domestic use, for the cleaner of dirty water, for emptying tanks, domestic drains and collection traps, even with suspended solid bodies with dimensions up to ø 20 mm.
Delivery Body : glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1.
Suction Grid : technopolymer
Motor Support : Stainless steel AISI 304
Motor Shaft : Stainless steel EN 10088-3 – 1.4104
Double seal : Mechanical seal ceramic – graphite – NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Motor : Submersible asynchronous single-phase for continuous duty.
TOP-VORTEX : single-phase 220÷240 V – 50 Hz with capacitor and thermal overload protector.
Insulation : class F
Protection : IP 68
Registered model n° 72765
TOP-VORTEX Float switch
Neoprene power cable “H05 RN-F” length 5 metres with schuko plug.