Construction
Close-coupled centrifugal, electric motot with extended shaft directly connected to the pump up to 22 kW, new barcket construction for standard motors (stub-shaft contruction) from 30 to 75 kW with integrated thrust bearing.
Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733.
NM(S) : version with pump casing and lantern bracket in cast iron
B-NM(S) : version with pump casing and lantern bracket/casing cover in bronze. (the pumps are supplied fully painted)
Connections : Flanges according to PN 10, EN 1092-2.
Counter-flanges (on request) : Flanges for welding EN 1092-1, PN 10
Applications
For clean liquids without abrasives, which are non-aggresive for the pump materials (solids content up to 0.2%). For water supply.
For heating, air conditioning, cooling and circulation palnts.
For civil and industrial applications
For fire fighting applications. For irrigation
Operating Conditions
- Liquid temperature ftom -10°C to +90°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 m
- Maximum permissible working pressure up to 10 bar (16 bar for NM 32L/16,20; NM 40/16,20; NM 50/12,16; NM 65/12,16,20,25; NM80/16; NM 100/20).
- Continuous duty
Motor
- 2-pole induction motor, 50 Hz (n = 2900 rpm)
- NM, NMS : three-phase 230/400 V ±10% up to 3 kW; 400/690 V±10% from 4 to 75 kW
- Insulation class F. Protection with frequency converter from 1.1 kW
- Classification scheme IE3 for three-phase motors from 0.75 kW
- Constructed in accordance with : EN 60034-1; EN 60034-30-1
Specia Features on Request
- Other voltages. Frequency 60 Hz (as per 60 Hz data sheet)
- Protection IP 55. Special mechanical seal
- Packed gland (only for NM standard construction)
- Single phase motor (NMM) up to 1.5 kW
- Higher or lower liquid or ambient temperatures
- Motor suitable for operation with frequency converter up to 0.75 kW
Materials
| Component | NM. NMS | B-NM, B-NMS |
| Pump casing Lantern Bracket Nm Casing cover for NMS | Cast Iron | Bronze |
| GJL EN 1561 | G-Cu Sn 10 EN 1982 | |
| Impeller | Cast Iron, GJL 200 EN 1561 | Bronze G-Cu Sn 10 EN 1982 |
| Brass P-CU ZN 40 Pb 2 UNI 5705 for 32/12, 32/16, 32/20, 321/20, 40/20 | ||
| Shaft | Cr-Ni Steel AISI 303AISI 430 from 3 kW to 22 kW | Cr Ni Mo Steel AISI 316 ̴ |
| Mechanical seal | Carbon-Ceramic-NBR | |
| Counter – Flanges | Steel Fe 430B UNI 7070 |
Specifications
- Rated motor power output : 55 kW, 75 Hp
- Kapasitas Pompa (Q) : Total Head (H)
75 m3 (1250 l/min) 95 m
84 m3 (1400 l/min) 94.5 m
96 m3 (1600 l/min) 93.5 m
108 m3 (1800 l/min) 92.5 m
120 m3 (2000 l/min) 91.5 m
132 m3 (2200 l/min) 90 m
150 m3 (2500 l/min) 87.5 m
168 m3 (2800 l/min) 84 m
180 m3 (3000 l/min) 80.5 m
192 m3 (3200 l/min) 76.5 m - Weight : 287 kg