Pompa Celup Pedrollo Air Bersih Stainless VL (SUS 304)

Description :

Pompa Celup Pedrollo Air Bersih Stainless VL (SUS 304)

Range Of Performance
Flow rate up to 120 l/min (7.2 m3/h)
Head up to 105 m

Limits Of Use
Manometric suction lift up to 7 m
Liquid temperature up to +40°C

Installed And Use

They are recommended for pumpig clean water and liquids that are chemically non aggresive to the materials from which the pump is made
Their reliability and quiet running make the suitable for domestic and civil applications, because the pumps is fully submersible with the motor cooled by the pumped liquid, it can be used safely in wet environments
And in spaces with insufficient ventilation

Construction Characteristics
Outer case and motor support : Stainless steel AISI 304 case with threaded ports ISO 228-1.
Impellers and diffusers : Technoplymer
Diaphragms : Stainless steel AISI 304, complete with-wear rings
Motor Shaft : stainless steel EN 10088-3 – 1.4104
Double seal : Mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Screws : stainless steel AISI 304
Motor : electric, asyinchronous for continuous duty
VLM 4 : Single-phase 220÷240 V – 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external overload protector (with manual reset) incorporated into the control box
VL 4 : three-phase 380÷415 V – 50 Hz
Insulation : Class F
Protection : IP 68

Standard Features :

VLm 2 (single-phase ) 2 m power cable type “H07 RN-F” with removable connector
Control box with capacitor and schuko plug
VLm 2 (three-phase) 2 m power cable type “H07 RN-F” with removable connector.
VLm 4 (single-phase) 2 mt power cable type “H07 RN-F” with removable connector
Control box with capacitor and schuko plug
VL 4 (three-phase) 2 mt power cable type “H07 RN-F” with removable connector.


Leave a Comment

Your email address will not be published. Required fields are marked *