Detail Product : The Electro-Pneumatic Positioner NT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC 4 to 20mA or split ranges. There is no resonance at 5~200Hz. The change of RA/DA Acting is convenient, it is able to apply …
Manual Override & Air Filter Regulator Manual Override Housing : Cast Iron or Aluminum Alloy Gear Guardant : Ductile Iron Input Shaft : ASTM A29M+Chrome plated Temperature Range :-20ºC to + 120ºC (-4ºF to +248ºF) Stroke Adjustment : ± 5ºat each end Movement): 0º~90º Finish Paint : Two Polyurethane Coated Enclosure : Sealed to …
Specification : Model : SV310-08 dan SV320-08 Medium : Air Operating : Internal Piloted Valve Type : 5 Port 2 position Orifice Size : 35mm² Port Size : Inlet & Exhaust Port PF.1/4″ Lubrication : Not required Pressure Range : 0.15~0.8Mpa Proof Pressure : 12 Bar Temp. Range : -5~60°C (23~140°F) Voltage Range : -15%~10% …
NT 1000 Electro-Pneumatic Postioner Linear Type NT-1000L The Electro-Pneumatic Positioner NT-1000L is used for operation of pneumatic linear valve actuators by means of electrical controller or control systems with an analog output signal of DC 4 to 20mA or split Ranges. There is no resonance at 5~200Hz. The change of RA/DA Acting is convenient, it …
Technical Data : Sensitivity 25.4mm water column Flow Capacity 565LPM Exhaust Capacity(5psi above,20psi set point) 2.8LPM Effec of Supply Pressure Variation(25psi) On Outlet Pressure < 0.2PSI(0.01bar) Max. Input Pressure 1700KPa Output Pressure Range 0-200KPa; 0-400KPa; 0-800KPa Filtration: 5um Temperature Range -18˚C to 71˚C Total Air Consumption at Max. Output: 2.8LPM …
