Analog/Mechanical Brass Multi Jet Vane Wheel Dry Dial Cold 50°C and Hot 90°C Clean Water Meter Size DN 15-DN 50 (1/2″-2″)
Description :
SHM Multi Jet Brass Flow Meters : Analog/Mechanical Flow Meter for Clean Water are made from brass material and nternal measuring component made from modern thermoplastic material.
Application:
SHM Multi Jet Brass Flow Meters can be used for :
- Irrigation, cooling systems, filtration systems, water monitoring, residentials, etc.
Features :
- Multi Jet, Dry Dial, Turbine Type
- Magnetic Drive reliable characteristic, long working life. Pulse output Optional.
- Vacuum sealed register ensures the dial keep free from fog and frost, keep the reading clear in a long term service.
- Working temperature 0.1-50°C for Cold Water and 0.1-90°C for Hot water
- Water pressure </=1.0 Mpa 0r 1.6 Mpa
- Protection Grade : IP 68
- Maximum Pemissible Error :
- In the lower zone from qmin inclusive up to but excluding qt is +/-5%
- In the upper zone from qt inclusive up to and qs is +/-2%. For hot water meter +/-3%
- ISO 9001 and ISO 4064
- Warranty 2 years (Full service and spare parts)
Technical Specifications
Size (DN) : 15, 1/2 Inch, (15 mm)
Over Load Flow Qs : 3 m³/hour
Permanent Flow Qp : 1.5 m³/hour
Transitional Flow QT : 120 l/hour
Min Flow Qmin : 30 l/hour
Length (L) : 165 mm
Width : 98 mm
High (H) : 116 mm
Weights : 1.65 Kg